Quick Answer: Can You Apply Thompson’S Water Seal With A Roller?

What temperature do you apply Thompson’s Water Seal?

Be sure that both surface and air temperatures are above 50°F during application and remain above 40°F for 48 hours after application.

Do not apply product if rain is forecasted within 24 hours of application..

How do you seal a deck with a roller?

Apply the deck sealer with a natural bristle brush. A roller is faster, but brushing helps force the sealer into open pores and grain. Make sure to get the sealer into joints where two boards butt together. Apply the deck sealer to three or four boards at once, working their entire length.

How many coats does Thompson’s Water Seal have?

2 coatsshake the can vigorously before use. Thompson’s Water seal has a slightly milky appearence in the can,but clears quickly upon application. For best results ensure the surface is as dry as possible. Apply 2 coats using brush,roller or sprayer.

Is Thompson’s Water Seal any good?

5.0 out of 5 stars Love Thompson’s Water Seal with the harvest gold color! Basically, it takes your weather worn fence and restores it back to almost new looking boards, plus protecting it from the elements. I used my spray gun to apply, and a little goes a long way. Obviously, you can use a brush to apply it as well.

Is it better to stain or seal a deck?

Many deck companies recommend using a combination stain/sealer product, which is basically a sealer with pigment added. The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.

How long does Thompson’s Water Seal last?

10 yearsIf applied correctly, Water Seal will last up to 10 years.

Can you put 2 coats of Thompson’s Water Seal?

Thompson’s WaterSeal Waterproofing Stains. Application: Only one coat is recommended for both Semi –Transparent & Solid. A second coat can be added if more color is desired. Allow the first coat to dry (approximately 2 hours) before second application.

What is the best way to apply Thompson’s Water Seal?

Only one light coat is necessary in most applications. Apply by brush, roller, dipping, or sprayer. A garden “pump-up” style sprayer is the simplest method. If over applied, remove excess before it dries by redistributing to dry areas or wiping off.

Can you use a pump sprayer to apply Thompson’s Water Seal?

Can you apply Thompson’s Water Seal with a pump sprayer? A pump sprayer, sometimes chased by a pad, is the usual recommended method for applying sealers and at least semi-transparent stains.

What is the longest lasting deck sealer?

Our Top PicksBEST OVERALL: SEAL-ONCE MARINE Penetrating Wood Sealer. … EASIEST APPLICATION: Eco Advance Exterior Wood Water Repellent. … BEST VALUE: Olympic Stain Smartguard Concentrated Sealant. … LONGEST-LASTING SEAL: Olympic Stain Maximum Waterproofing Sealant.

What happens if it rains after applying Thompson’s Water Seal?

Rain will damage the finish of any wet sealer with linseed oil or mineral oil in it. Because it forms a coating, it takes several hours to “set up” (dry) and during that time the sealer is vulnerable.